Search Heco's growing HVAC knowledge library for repair symptoms, maintenance, parts, heat pumps, replacement planning, permits, rebates, commercial systems and more.
Heco HVAC · Experience since 2006 · California contractor license #1050351
Detailed homeowner guides explain safe checks, possible causes and when to request professional diagnosis.
Search what you observe—not what you think the failed part is. Several HVAC faults can produce the same symptom, and an on-site diagnosis is often needed before choosing a repair.
4 matching answers
Clear filtersSome air handlers require a properly designed trap because the blower pressure at the drain connection can prevent water from draining correctly without it. The required configuration depends on the equipment.
Water in a secondary pan means the primary condensate path or equipment drainage should be inspected. The backup pan is a warning/containment measure, not a normal place for ongoing drainage.
Yes. A float switch may intentionally interrupt operation when water backs up. Clearing and correcting the drain problem can restore operation if no other fault exists.
Recurring clogs can be related to biological buildup, improper slope/trap, dirty drain pan, sagging piping or discharge problems. The drainage design should be checked rather than repeatedly clearing the same blockage.
Equipment condition still requires professional evaluation. For regulations, rebates and efficiency guidance, Heco checks authoritative sources and identifies items that can change.
Tell Heco the symptom, equipment type, property type and location. We will help identify the next practical step.